Home * Ford Diesel 6.0 * 6.0 Engine * IPR High Flow Coolant Filter Ford 6.0

IPR High Flow Coolant Filter Ford 6.0

IPR High Flow Coolant Filter Ford 6.0
Center magnet attracts metal particles
(11 reviews)  

IPR Innovative Performance Research Innovative Performance Research has finished testing and is currently producing our coolant filters. This filter is the only one the in the market that can be used as a full flow filter, this will allow you to install it inline on the heater hose and filter 100% of the coolant that runs through the heater hose which is much more effective in contamination filtration than anything out in the market. You can also use it as a bypass filteration by using a T connector. No need be concerned that filter may completely plug up, this would not cause any issues if the filter was to completely plug, you would only lose heated coolant going to your heater core = no heater. IPR's High Flow Coolant Filter is fully serviceable, the filter can be fully dissassembled and washed with any conventional degreaser or solvent. The filter element is stainless steel and features magnet in the bottom center of the element. The magnet attracts metallic particles such as corroded cast iron from your engine block that has separated. The magnetic design was implemented to extend filter service intervals, it allows the filter element to trap sand and non metallic particles while most of the metallic particles stay on the bottom of the filter element bonded on the magnet. IPR's High Flow Coolant Filter is much more effective because IPR uses 3/4" hoses. IPR has seen many coolant bypass kits in the last 2 years and have refuse to develop a product that is minimally effective using only small 1/4 or 3/8 heater hose. Most of these other bypass filtration kits on the market uses a Baldwin filter with a 1/8 orifice. IPR's High Flow Coolant Filtration out flows anything in the market by 83%!!!

Check out these pictures on powerstroke.org of actual customer's filtering results

SKU CF60473  
Weight 7.00 lbs
Product Manual Product Instructions
Coolant Filter Tool
Our price: $249.00
: *
: *
: *
Type the characters you see in the picture:

The code is case-sensitive and must be entered exactly as above.
Average customer rating:
(11 reviews)  

5 Most useful customer reviews (see all reviews):
Excellent product, I recommend this for any engine. Was on my 6.0, then put on my 7.3. The filtering is amazing. Well done fellas! One thing I would add to your kit are ball valves on the filter. That way fluid loss is just what's in the filter bowl.
Loading...Was the above review useful to you? Yes (1) / No (0)
Mr. James Jecker
Oct 26, 2017
This setup was recommended to me by my diesel shop. I had severe rust in my block. I was going through an oil cooler every 6 to 8 months. I have run this setup now for 4 years and have not gone through any oil coolers. This is the product to save your engine. No joke it really did keep me from having to buy a whole new engine and thousands of dollars worth of repairs every year to replace coolers
Loading...Was the above review useful to you? Yes (0) / No (0)
Brandon Beckley
Oct 18, 2017
This filter kit is one of the best kits I have seen. The machined parts are beautiful and very functional. The filter element works perfect and catches much more than i thought it would. I would recommend this to anyone.
Loading...Was the above review useful to you? Yes (0) / No (0)
Mr. Trae Hardman
Sep 6, 2017
Daily cleaning at first now monthly..Does it's job well.
Loading...Was the above review useful to you? Yes (0) / No (0)
Curtis mancuso
Jul 21, 2017
Works great I paired this with the gen 3 manifold works like a charm. I had my 6.0 flushed for 10 hours with many gallons of distilled water before install, and this filter is still capturing every little iron flake and sediment that fords junk coolant left behind. Way better setup then any other filtration setup out there it's inline not a bypass
Loading...Was the above review useful to you? Yes (0) / No (0)