Happy with the OEM gaskets but some of the other gaskets did not appear to be as high of quality as OEM

Great product, the new mesh still traps all the crud without clogging as quick. I highly recommend the IPR high flow filter with the manifold. Best there is for the 6.0

This filter kit is one of the best kits I have seen. The machined parts are beautiful and very functional. The filter element works perfect and catches much more than i thought it would. I would recommend this to anyone.

can't go wrong with ARE head studs and despite people not liking the black diamond head gaskets, I found them to be of good quality and have had no issues so far.

I bought the manifold first then went back and bought the high flow coolant filter later to compliment the manifold. I haven't really ran the truck long enough but it looks to be good qaulity and easy installation i will update my post after running the truck and putting miles on it. But so far it looks amazing time will tell on performance.

outstanding customer service. anytime I have a question either by phone
or email I get a quick answer. VINCE really knows his stuff about his products. a real pleasure to talk to, recommend his products to everyone I no.

High quality components are working great as advertised.

The filter is doing its job. The manifold was straight forward to install. That bolt under the turbo is a real pain. I used an allen wrench with a rubber band around my finger as its hard to get the allen wrench out of the valley underneath it.

I had recently acquired a 2004 F350 DRW Superduty and discovered after purchasing a ScanGauge II that the deltas between the coolant temps and engine oil temps at 65 mph were close to 25 degrees - F_CK!!! So, after a significant amount of research with the hope of avoiding the work needed to install a new Ford Oil Cooler (according to the previous owner, that one in the truck was installed roughly 40K miles ago - an OEM Ford Cooler), I decided on a rigorous coolant system flush and the IPR High Flow Coolant Filter (100% filtering) with the Coolant Manifold.

So, I spent an entire day flushing the old coolant from the truck and then did a full flush using Restore & then the Restore+. I then installed the IPR coolant manifold (without having to remove anything - just moving some hoses out of the way) and used that to give the existing oil cooler a rigorous back flush using an air-assisted flushing gun from Tooltopia (disconnected the lower radiator hose at the radiator to allow backlashed crap from the oil cooler to spill in to a bucket). I then fabricated a bracket to mount the IPR coolant filter/manifold which is now located between the passenger side battery and the radiator with the coolant filter facing down (vs the recommended location/position).

I have now run the truck with the new coolant (Triax HD ELC EC-1 rated Coolant used for Heavy Duty Applications 6 yrs/600,000 miles/12,000 hours). At 500 miles, I pulled out the coolant filter and even with all of that flushing, there was still a ton of rusty metal/sand particles - the first cleaning improved my temp differences dramatically (deltas were in the 12 degree range at 65 mph) and after more cleaning at another 500 miles (yes, a bit less crap but still plenty to effect the flow through the coolant filter) - I will now check the coolant filter maybe every 1000 miles - the deltas are now within 6-8 degrees at 65 mph (and up to 12-14 degrees at higher speeds)!!! The entire effort/price was well worth it - I highly recommend this IPR Coolant Filter and Coolant Manifold (the 100% filtering version)! It saved me the time/effort/cost of replacing my Oil Cooler but more importantly, I now have peace of mind that my coolant is clean and that the oil cooler is not going to get crapped-up anymore!

Great product, very good quality. A little expensive but I now have piece of mind that nothing is getting inside my hpop

Great product works great .Ford Tech even liked fitment and function.

I installed the GEN3 EGR Delete Kit in my 06 6.0 PSD. Installation was simple and a valued addition when installing the IPR remote oil cooler with a coolant filter ahead of the oil cooler. It provides a very easy route for coolant lines to the coolant filter and from the oil cooler which eliminates the need for tees on heater lines. Thanks IPR for this easy improvement.

By far the only EGR delete kit I will ever use again. Fits great and no hoses or pipe fittings to worry about leaking. Now all they need to do is set Mumblys off road up as a dealer.

Nice filter easy to service great piece. I did get the filter tool with it, someone took it out of the package and misplaced it.

Great product! Above all is the customer service Vince provides. I have never experienced such great customer service from any other company and will happily continue buying products from IPR. Thanks Vince, keep up the good work.

Welds look good, aesthetic ipr badge near the top, solid fit.

Very well made and thought out. I wish more companies produced high quality products like this not the "China Specials" , buy cheap and slap on a logo substandard junk we have to deal with anymore. You get what you pay for and this was funds well spent.

Great design. Looks and feels like a quality product right out of the box. Went well with the matching remote cooler and high flow coolant filter. Vince really does care about customer service and being a strong competitor in the PSD category. Calls me back anytime I have a question.

Heavy duty quality EGR cooler. The welds, fit and finish is perfect! No regrets buying and installing on the truck.

This is an awesome kit, takes away all the guess work. Kit was packaged very well and customer service was excellent! I would highly recommend IPR gasket and ARP stud kits.
John McGowen
Klamath Falls, Oregon.

Quality build construction! These should be the quality standard for 6.0Ls. I'll never use an oem plastic POS screen again!

Best up pipe out there and fit like a glove

Great products and fast service!

Best quality of stuff on the market. Hands down

just want to say thanks to vince at ipresearch for his help advice and great customer service always goes out of his way to get you what is needed for my f series truck