Home * Ford Diesel 6.0 * 6.0 Engine * Gaskets & Seals * ARP Head Studs & Mahle Head Set 20mm Package B

ARP Head Studs & Mahle Head Set 20mm Package B

ARP Head Studs & Mahle Head Set 20mm Package B
 
(0 reviews)  

IPR has put together a master head gasket set to get back on teh road fast. We have included everything to make it easy for you to finish the job without trying to figure what you need. Ford sells 2 head gaskets, 2 stand pipes with head bolts that you throw away anyways priced at over $550. You will still need to purchase quite few more gasket to make a complete kit, by the time you're done with getting a package similar to IPR's package you would have to spend over $800 in gaskets. This kit allows you to save some money and get the complete head set to rebuild both heads with ARP studs. No other vendor's 6.0 gasket kit is as complete as mine, please check the itemized seals, gaskets and o-rings listed. Other sellers claim that they supply everything to do the job which is short on components. We will match any advertise price and will not be undersold!
 
Tech tip. When rebuilding 6.0 heads we recommend that you have your heads resurfaced and Magnaflux for cracks. 6.0 heads are notorious for cracks around the valve seat area which may be causing your truck to lose coolant and over heat which may seem like blown head gaskets have failed. My kit includes 32 valve stem seals valued over $120 to have your heads rebuilt. You pay thousands of dollars for labor don't put in the old heads without a rebuild, you may have to do it again down the road in the near future.
 
 

1. ARP Head Studs
2. Head Gaskets 2 required
3. Rocker box gaskets 2 required
4. Valve cover gaskets 2 required
5. Valve cover grommets 20 required (10 per head)
6. Valve stem seals 32 required
7. Injector O-ring Kit 8 sets required
8. Intake manifold gasket set and throttle body o-rings
9. EGR Cooler/Valve Gaskets O-rings
10. Exhaust manifold gaskets 2 required
11. All buna n o-rings/copper o-rings for your fuel lines
12. High Pressure Oil Pump Housing Gaskets
13. Oil Filter housing O-rings
14. Fuel Filter Housing O-rings
15. Oil Cooler Housing Gasket
16. Stand Pipe O-rings (rebuild your old stand pipes) Ford sells these for over $45 per side!
17. O-rings for all your sensors

This kit basically comes with every seal, o-ring and gasket from the heads up.

 

We also recommend Ford's revised parts and updates while you have your truck apart whenever you install a oil cooler, EGR cooler, EGR delete or any time you may be removing the intake manifold and turbo off for repairs. These updates are easily accessible when performing any of the mentioned upgrades or repairs on your 6.0. Don't wait until these components fail and having to perform the job a second time.

Click Here Ford Update Parts

SKU HS-20PKB  
Weight 10.00 lbs
 
Our price: $1040.00
Quantity   

  • WARNING: Some products in your order can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
: *
: *
: *
 
Ford 6.0 Lower Radiator Hose F250, F350, F450, F550 International VT365
IPR Extreme Duty Aluminum Radiator 52mm Core 2008-2010 F250, F350, F450, F550
Ford 6.0 PCV Breather Tube 2003-2010 F250, F350, F450, F550, E350, International VT365
Ford 6.0 Lower Radiator Hose F250, F350, F450, F550 International VT365 IPR Extreme Duty Aluminum Radiator 52mm Core 2008-2010 F250, F350, F450, F550 Ford 6.0 PCV Breather Tube 2003-2010 F250, F350, F450, F550, E350, International VT365
$72.79
$529.00
$37.56
 
Ford 6.0 Intake Manifold Bolt with studded head
FORD Exhaust Up Pipe Late 2004-2007 w/Square Body EGR Cooler F250, F350, F450, F550 Powerstroke 6.0 International VT365
IPR Billet High Flow Turbo 2004-2007 Powerstroke 6.0
Ford 6.0 Intake Manifold Bolt with studded head FORD Exhaust Up Pipe Late 2004-2007 w/Square Body EGR Cooler F250, F350, F450, F550 Powerstroke 6.0 International VT365 IPR Billet High Flow Turbo 2004-2007 Powerstroke 6.0
$6.96
$181.05
$975.00
 
Ford 6.0 Oil Pump Production Date July 04-Dec 2012  F250, F350, F450, F550/International VT365
IPR High Flow Coolant Filter Replacement Element For 6.4
IPR Oil Filter For Use With Ford 6.0 V2 Oil Filter Cap/External Oil Cooler Kit
Ford 6.0 Oil Pump Production Date July 04-Dec 2012 F250, F350, F450, F550/International VT365 IPR High Flow Coolant Filter Replacement Element For 6.4 IPR Oil Filter For Use With Ford 6.0 V2 Oil Filter Cap/External Oil Cooler Kit
$691.56
$95.00
$18.49
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
IPR Knows Ford Diesel

Paypal Verified